Top 5 Best Pneumatic Framing Nailer Review In 2020

The emphasis on owning the right pneumatic framing nailer could be a huge factor if you’re looking to work on any large construction project. With one, hammering down 100 nails is just a short matter of time. Consistency is the key to a professional finish here.

However, selecting the right one should be your priority and that requires you to do some research. But if you’re in a hurry, our suggestion would be to go for the SFR2190Pneumatic Full Round Head Framing Nailer from NuMax.

This one is raved by most professionals and DIY workers in this line. Why? Because it has got a body that would last for a long time, has a quick-firing option to get your work done in no time, an air exhaust that would leave no debris on your workstation, and finally you could adjust the firing depth according to your needs.

Our Top 5 Pneumatic Framing Nailer

After thorough research, we’ve assembled 5 of our top pneumatic framing nailer with in-depth reviews to help you choose the right tool. Here we’ve included the material from which the nailer is made to how it will feel in your hand and help you work safely.

The firing depth adjustment is one of the important attributes that you should keep in mind while buying one. Even if you’re not sure about which one to choose after going through the review, our buyer guide will help you make a decision.

So, you will be getting all the necessary information that you’re going to need while buying a pneumatic framing nailer. 

What is Pneumatic Nailer? 

A pneumatic nailer is the most sought-after nail gun in the market. This nailer basically works by using compressed air generated by a gas-powered air compressor. The nailer has a compartment which reserves air pulled in from the atmosphere.

This compressed air is used to drive a shaft above the compartment and fire nails on the woods or materials.  

Product Review

Let’s talk about the products now, shall we? Jump to the reviews and pick the ones that suit your taste.

1. NuMax SFR2190 Pneumatic 21 Framing Nailer

Features: 

  • Material: Magnesium with heat-treated steel parts.
  • Power Source: Air-powered
  • Weight: 8.58 lbs.

If you’re looking for a nail gun that gives you a magnesium body for maximum durability, you would definitely want to own it, right? The SFR2190Pneumatic Full Round Head Framing Nailer from NuMax is such a type.

This nailer is preferred by both professionals and DIY project workers for its quick-firing function. You have the option to choose between applying a bump-fire if you prefer the quick-firing feature or single-fire if you prefer accurate placement.

What’s amazing is the fact that it stops firing the nails if you’re low on them. So, you could always replace them and get to work again.

Plus, nobody typically likes to work on a messy workstation, right? Its 360-degree adjustable air exhaust allows you to keep your workstation debris-free. It also has an air filter/anti-dust cap that will help you keep your tool’s internal part clean and ready for next time use.

You could also adjust the firing depth for each of your projects. This will ensure the same driving depth on a constant basis.

The no-mar tip is there to ensure no dents are left on the piece when you are done with the work. Also, there is a no-slip teeth underneath the no-mar tip which allows the tool to grip easily on to the wood. This helps in providing a professional and secure finish on your workpiece.

And say goodbye to all those vibrations and times when the tool would likely slip away from your fingers. The superior ergonomic grip of the SFR2190 is there to prevent that.

You could use any nail ranging from 20 degrees to 22 degrees. Its magazine has the capacity to fit nails from 2” to 3-1/2” long.

Finally, it comes with a 1/4" NPT fitting on its body which will allow you to fir the air hose couplers without going for the trouble to buy it separately. Nice, right?

Pros:

  • Does not cause jamming.
  • Has a quality build which is very durable.
  • Easy to assemble, disassemble, and swap the triggers.   

Cons:

  • Could cause a fair amount of recoil.
  • Might be heavier than expected.

2. Freeman PFR2190 Pneumatic 21 Degree Framing Nailer

Features: 

  • Material: Magnesium, anodized aluminum, and heat-treated steel parts.
  • Operating Pressure: 70-115 PSI
  • Power Source: Air-powered  
  • Weight: 8.5 lbs.

Now if you’re are looking for a tool that almost every feature of SFR2190 from NuMax, except that it feels more lightweight in your hands, you could go for the PFR2190 Pneumatic 21 Degree 3-1/2” Full Round Head Framing Nailer from Freeman.

The body is made out of magnesium to ensure maximum durability. Like the SFR2190, it has also got an interchangeable trigger that you could use for quick-fire or single shot fire.

Plus, it gives you the ergonomic case for secure handling and non-vibrational sensation.

The 360-degree adjustable air exhaust will help keep away any dust or debris away from your workstation. Plus, change the firing depth as per your project requirement with the depth adjustment feature.

It also has a no-mar tip for protecting your workpiece from any dents, so you don’t have to worry about getting those anymore. Plus, the no-slip teeth is there under the no-mar tip to hold your workpiece strongly for ensuring a secure firing.

Lastly, like the SFR2190 again, you get a 1/4” NPT pre-installed fitting to fit most of the air hose couplers. The tool also stops firing if your nail counts get low to prevent any internal damage to itself. Just imagine how handy this tool could be for your work.

Pros:

  • Excellent quality builds with long-term durability.
  • Provides flawless performance.
  • Weighs comparatively lighter than any other tools of its kind.

Cons:

  • Might cause nail jamming issues at times.
  • Trigger valve might leak air.

3. Hitachi NR90AES1 Framing Nailer

Features: 

  • Material: Metal
  • Power Source: Air-powered
  • Weight: 10 lbs.

If you love to work for a short duration on your project and looking for a way to just quickly put off your nailer, then NR90AES1 Framing nailer from Hitachi could your optimum choice. Well known for its quick disassemble feature, it has a new head design that allows optimum tool maintenance.

It supports nails that are plastic collated full head 2” to 3-1/2” nails. It is quite lightweight and would provide you with a good balance in terms of maneuvering it around easily.  So, you don’ have to worry about getting fatigued as well.

The NR90AES1 comes with a selective actuation feature that allows the user to quickly change between the sequential and contact nailing just with the flip of the switch.

You could countersink or flush drive into different kinds of materials with the help of its tool-less depth adjustment. If the magazine requires repair or replacement, you could change it easily.

Also, say goodbyes to your nail reloading process with the help of two step nail loading feature.

Plus, due to the incorporation of rubber grip, you won’t feel a thing even after working with it for a long time. This also allows a secure grip hold on the tool.

Pros:

  • Ease to use and maneuver.
  • Superior quality build.

Cons:

  • Might misfire at times.

4. BOSTITCH Framing Nailer Round Head

Features: 

  • Operating Pressure: 80 to 120 PSI
  • Driving Power: 1,050-inch-pounds
  • Power Source: Pneumatic
  • Weight: 4.17 lbs.

Now let’s take a look at the Round Head Framing Nailer from BOSTITCH. If you’re looking for a tool that provides 2-in-1 nail gun support that you could use either for framing or metal connecting purpose, then this is it.

Coming with a fastener collation and fastener depth control, this 1 ½ inch to 3 ½ inch framing nailer from BOSTITCH gives you 1,050-inch-pounds of driving power. Isn’t that great? That too with a sequential and bump trigger.

You could utilize the 2 quick-change nose pieces to quickly convert the tool to use it for framing or metal connector applications.

With an operating pressure of 80 to 120 PSI, the framing nailer has a pneumatic power source. And to make the body feel lighter in your hands, it is made out of magnesium housing. So, you could count on getting the most of this handy tool.

Plus, the grip is made of rubber and it also has integrated rubber skid pads.

Pros:

  • Changing the tips and nails is quick and easy.
  • Well-balanced body build and comfortability in terms of usage.

Cons:

  • Might freeze up during cold weather.  

5. Hitachi NR83A5 3-1/4” Plastic Collated Framing Nailer 

Features: 

  • Power Source: Air-powered  
  • Weight: 9.1 lbs.

Professional and DIY workers who are looking to get a rapid response along with prolonged durability could make this NR83A5 3-1/4” Plastic Collated Framing Nailer with Rafter Hook from Hitachi their go-to tool

The rapid response comes from the cylinder valve drive system that has a loading capacity of 64-70 nails. 

You could also go for sequential or contact nailing made possible by the selective actuation on the trigger. To make your job easier, the rafter hook is attached to the tool as well.

Being able to widely control how much depth you would require with the help of the tool-less depth of drive adjustment is another amazing feature of this nailer.

Now tools get jammed, right? Even if the nails don’t get jammed at the beginning, there is a probability of getting so along the road. With this tool in your hand, you could easily take out the jammed nail due to its open nose design.

Moreover, the tool won’t slip out of your hand due to its ergonomic non-slip rubber grip. Instead, you will find comfort while using it.

Though it won’t slip out of your hand, there is the issue of slippage when driving the tool at an angle which is also known as toe nailing. The hardened claw tip decreases the chances and also helps in resisting the wear on the nose.

Pros:

  • Exceptional quality build.
  • Satisfactory performance.

Cons:

  • Weighs pretty heavy.

6. NuMax S2-118G2 Pneumatic 2-in-1 18-Gauge 2” Brad Nailer

Features: 

  • Material: Aluminum body with heat-treated steels parts
  • Operating Pressure: 60-110 PSI
  • Power Source: Air-powered  
  • Weight: 3.08 lbs.        

So, after looking at all those pneumatic framing nailers, let’s take a change here. Why don’t we take a look at a different nail gun- a pneumatic brad nailer. The S2-118G2 Pneumatic Brad Nailer from Numax is a 2-in-1 convenient nailer which also works as a stapler.

Its body is made of aluminum to make it feel lightweight in your hands. Plus, it also has a anti-vibration comfort grip so that you won’t feel the vibrations coming off while working and the tool won’t slip away from your hands as well.

You could choose this nailer for its flexibility. It uses 2 types of fasteners; one is the 18-gauge brad nails and other is the 18-gauge 1/4” narrow crown staples.

Nails that are 3/8” to 2” long and staples that are 1/2" to 1-5/8” could be used in this nailer. So, no wonder that it could be used for different number of various projects.

Be it for your roofing, siding, or flooring purpose, this tool can be used for all types of work and even more. You could rely on the quality and durability due to the very strict quality control guidelines. Thus, making this tool suitable for your professional and DIY works.

Pros:

  • Is comparatively lightweight.
  • No complications while using this tool.
  • Does not cause any misfire or nail jamming.

Cons:

  • Might cause issues while stapling.

Pneumatic Framing Nailer Buying Guide 


If you’re reading this, then you probably still want to be sure about the features that will help you determine which pneumatic framing nailer that you would need to buy. Don’t worry, we got you covered here with our buying guide.

Weight-

Pneumatic framing nailers are usually used for heavy duty works such as a large shed construction or garage construction, wood house construction etc.

There are nailers out in the market which could offer you the possible less weight with the optimum output. The framing nailer from BOSTITCH is such a kind that you could look into as your buying choice.  

Trigger mechanism–

With SAT or sequential actuation trigger, one could only fire one nail at a time given that safety is pulled down first and the trigger is pressed.

If you prefer this mechanism, you could go for the The SFR2190Pneumatic Full Round Head Framing Nailer from NuMax.

With CAT or contact actuation trigger, you will be able to squeeze the trigger and bump the safety tip on your work piece repeatedly while holding the trigger which will allow you to fire multiple nails.

If you prefer this mechanism, you could go for the this NR83A5 3-1/4” Plastic Collated Framing Nailer with Rafter Hook from Hitachi.

Comfortability-

If you’re going to use your nailer on a regular basis, better choose one which provides the most comfort to your hands.

Round Head Framing Nailer from BOSTITCH could be your ideal choice in this case if you’re seeking comfortability.

Types of Nails:

If you prefer working with round-head nails, you could choose The SFR2190Pneumatic Full Round Head Framing Nailer from NuMax.

Otherwise, you could go for the NR83A5 3-1/4” Plastic Collated Framing Nailer with Rafter Hook from Hitachi.

Depth Adjustment-

Now, if you’re looking to work on a project, a large one at that, we suggest that you go for a nailer that has a depth adjustment feature.

This will allow you to determine how deep your nails will be piercing in through the material that you’re working on. The PFR2190 Pneumatic 21 Degree 3-1/2” Full Round Head Framing Nailer from Freeman could be a great choice here.

Faq

Why would I choose a pneumatic framing nailer?

If you’re looking to work on a large construction project or DIY work, you could choose pneumatic framing nailer as it would help you fire a large of nails required for your work.

What size of compressor would I need for my pneumatic framing nailer?

A pneumatic framing nailer does not need constant air supply. However, they need small air busts to hammer the nails into the wood or materials. 

So, a portable air compressor with at least 2 CFM rating would be fine for any work with 2-6 gallons of tank capacity.

 

Could a pneumatic framing nailer kill me?

Yes, it could. Although a nailer has its benefits, it could cause real safety concerns. Per US Centers for Disease Control, CDC, around 42,000 people goes to the emergency rooms due to injuries caused by nailers. 

While some may have cause hand, fingers, or feet injuries or required amputations, there are cases where injuries were fatal and resulted in death. So, it’s better to be careful and safe.

 

How does a pneumatic framing nailer works?

A pneumatic framing nailer is usually driven by compressed air as a means for their firing mechanism. It is attached by a rubber or plastic air hose to the base of the nailer.

Should I wear safety gears while working with pneumatic framing nailer?

Yes, anyone working with a pneumatic framing nailer should have proper safety gears and precautions in place to avoid any mishaps. That includes hearing protection and wearing protection gloves as well.  

Final Word

With all that said, hope that you’ve got a pretty good idea now about the nailer that you would like to buy the next time that you visit your local hardware store. If you’re still undecided, you could just go for the SFR2190Pneumatic Full Round Head Framing Nailer from NuMax. Good luck!